 |
 |
||
 |
 |
 |
|
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
DMS Incorporated
570a Telser Road
Lake Zurich,
IL 60047
U.S.A.
Phone:
847-726-2828
Toll free:
800-655-7882
Fax:
847-726-9292
DMS, Inc.
Rotary die maker.
Rotary dies for
economy, speed
and efficiency. Hot stamping equipment,
hot stamping dies.
Flexo press accessories.
Site Map
Site design and search engine optimization by:
FoilStream & TapeStream
DMS Narrow Foil and Magnetic Tape Unwind Systems
FoilStream Unwind Specifications
 |
Designed for .75” to 3 ” wide rolls of foil or tapes |  |
| |
Allows independent control and close spacing of multiple unwind streams | |
| |
Unique pivot arm design allows roll changes without losing stream positions | |
| |
Features adjustable, non-contact magnetic brake technology for super smooth operation | |
| |
Mechanical core holder for standard 3" cores | |
| |
Easy setup, adjustment and roll changeover | |
| |
Does not require air or electrical power | |
| |
Many mounting positions are possible with our universal hex bar mounting system |
|
| |
No loose parts to fall into press | |
 |
TapeStream Unwind Specifications
| |
Designed for .25” to .625 ” wide rolls of magnetic tapes or scratch off tape or similar products |  |
| |
Allows independent control and close spacing of multiple unwind streams | |
| |
Unique pivot arm design allows roll changes without losing stream positions | |
| |
Accepts industry standard plastic cores | |
| |
Easy setup, adjustment and roll changeover | |
| |
Magnetic roll latch and integral side guide | |
| |
Does not require air or electrical power | |
| |
Many mounting positions are possible with our universal hex bar mounting system | |
| |
No loose parts to fall into press |